Characteristics:
- Support Wi-Fi 802.11b/g/n, 1T1R mode data rate up to 150Mbps.
- Support BLE5.0, and rate support: 125Kbps, 500Kbps, 1Mbps, 2Mbps.
- 32-bit RISC-V single-core processor, supports a clock frequency of up to 160MHz, with 400 KB SRAM, 384 KB ROM, 8KB RTC SRAM
- Support UART/PWM/GPIO/ADC/I2C/I2S interface, temperature sensor, pulse counter
- SMD-18 package
- Integrated Wi-Fi MAC/ BB/RF/PA/LNA/BLE
- Support multiple sleep modes, deep sleep electric current is less than 5uA UART rate up to 5Mbps
- Support STA/AP/STA+AP mode and mix mode
- Support Smart Config (APP)/AirKiss (WeChat) of Android and IOS One-click networkconfiguration
- Support UART port local upgrade and remote firmware upgrade (FOTA)
- General AT commands can be better understand
- Support secondary development, integrated Linux development environment
- ESP-C3-13U module acquiesce in using the built-in 4MByte Flash, meanwhile support external Flash version
Specifications:
- Model Name: ESP-C3-13U
- Package: SMD-18
- Size: 14.0*18.0*3.1(±0.2)mm
- Antenna: IPEX
- Frequency Range: 2400 ~ 2483.5MHz
- Operating Temperature: -40°C ~ 85°C
- Store Temperature: -40°C ~ 125°C , < 90%RH
- Power supply range: Supply voltage: 3.0V ~ 3.6V, Supply current >500mA
- Support Interface: UART/GPIO/ADC/PWM/I2C/I2S
- IO: IO0, IO1, IO2, IO3, IO4, IO5, IO6, IO7, IO8, IO9, IO10, IO18, IO19, IO20, IO21
- UART Rate: Support 110 ~ 4608000 bps, default 115200 bps
- Bluetooth: BLE 5.0
- Security: WEP/WPA-PSK/WPA2-PSK
- SPI Flash: Default 4MByte, support 2MByte version
Rezensionen
Es gibt noch keine Rezensionen.